Product ID:4506 CINNASORB R ELEMENTAL MERCURY ABSORBENT ACTIVATOR
MSDS Date:03/17/1994
FSC:6850
NIIN:00F035947
Kit Part:Y
MSDS Number: BTPGJ

Emergency Phone: 201-859-2151

Info Phone: 201-859-2151

Cage: DO803

Telephone: 800-582-2537

Cage: 70829

SULFAMIC ACID

CAS: 5329-14-6

RTECS: WO5950000

Fraction By Weight: 90-100%

LD50 LC50 Mixture:ORAL LD50(RAT): 3160 MG/KG SULFAMIC ACID
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:INHALATION: NOSE & THROAT IRRITATION.
SKIN/EYES: SEVERE IRRITATION/BURNS. INGESTION: EFFECTS
GASTROINTESTINAL TRACT.
Explanation of Carcinogenicity:NONE
Effects of Overexposure:IRRITATION, BURNS, PAIN

First Aid:INGESTION: IF CONSCIOUS, IMMEDIATELY INDUCE VOMITING.
INHALATION: REMOVE TO FRESH AIR. APPLY CPR IF NOT BREATHING. GIVE
OXYGEN IF DIFFICULT BREATHING. SKIN: FLUSH W/WATER. EYES:
IMMEDIATELY FLUSH W/PL ENTY OF WATER FOR 15 MINS. OBTAIN MEDICAL
ATTENTION IN ALL CASES.

Flash Point Method:CC
Extinguishing Media:APPROPRIATE FOR SURROUNDING FIRE.
Fire Fighting Procedures:WEAR PROTECTIVE EQUIPMENT/SCBA W/FULL
FACEPIECE OPERATED IN POSITIVE PRESSURE MODE. MOVE CONTAINERS FROM
FIRE AREA SAFELY. KEEP CONTAINERS COOL W/WATER.
Unusual Fire/Explosion Hazard:EXPLOSION HAZARD WHEN HEATED. DECOMPOSES
AT MELTING POINT.

Spill Release Procedures:WEAR SCBA & FULL PROTECTIVE CLOTHING. WITH
CLEAN SHOVEL, PLACE MATERIAL INTO CLEAN, DRY CONTAINER & REMOVE
FROM AREA. FLUSH AREA W/WATER.

Handling and Storage Precautions:KEEP CONTAINER TIGHTLY CLOSED. STORE
IN CORROSION-PROOF AREA. ISOLATE FROM INCOMPATIBLE MATERIALS. USE
PROTECTIVE CLOTHING & EQUIPMENT WHEN HANDLING.
Other Precautions:AVOID CONTACT W/SKIN, EYES & ON CLOTHING. DON'T
BREATH DUST. USE ADEQUATE VENTILATION. READ ALL PRECAUTIONARY
INFORMATION.

Respiratory Protection:NONE REQUIRED W/ADEQUATE VENTILATION. IF
AIRBORNE CONCENTRATION IS HIGH, A DUST/MIST RESPIRATOR IS
RECOMMENDED. IF CONCENTRATION EXCEEDS CAPACITY OF RESPIRATOR, A
SELF-CONTAINED BREATHING APPARATUS IS ADVISED.
Ventilation:GENERAL/LOCAL EXHAUST TO KEEP FUME/DUST LEVELS AS LOW AS
POSSIBLE.
Protective Gloves:RUBBER
Eye Protection:SAFETY GOGGLES
Other Protective Equipment:UNIFORM, APRON, LAB COAT
Work Hygienic Practices:REMOVE/LAUNDER CONTAMINATED CLOTHING BEFORE
REUSE. WASH THOROUGHLY AFTER HANDLING.
Supplemental Safety and Health

Melt/Freeze Pt:M.P/F.P Text:401F
Decomp Temp:Decomp Text:401F
Vapor Density:3.3
Spec Gravity:2.1
pH:1.2
Solubility in Water:>10%
Appearance and Odor:WHITE CRYSTALS, ODORLESS.
Percent Volatiles by Volume:0

Stability Indicator/Materials to Avoid:YES
STRONG BASES, METAL OXIDES, NITRATES, CHLORINE & CHLORINE COMPOUNDS,
CARBONATES, CHEMICALLY ACTIVE METALS
Stability Condition to Avoid:HEAT
Hazardous Decomposition Products:OXIDES OF SULFUR, OXIDES OF NITROGEN,
AMMONIA

Waste Disposal Methods:DISPOSE OF IN ACCORDANCE W/LOCAL, STATE &
FEDERAL REGULATIONS. CORROSIVE WASTE D002. UN2967.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.